Philips DreamWisp Replacement Headgear โ Overview
The Philips Respironics DreamWisp Replacement Headgear is the genuine soft fabric headgear exclusively designed for the DreamWisp Nasal CPAP Mask โ a mask that fuses the DreamWear hollow top-of-head frame with the Wisp's proven over-the-nose nasal cushion. Because the DreamWisp uses a different frame and connection geometry to the standard DreamWear family, it requires its own dedicated headgear. This headgear is not interchangeable with other DreamWear or Wisp headgear models.
The defining feature of the DreamWisp headgear is its 4-point magnetic clip system. Rather than the single overhead strap of standard DreamWear headgear, the DreamWisp uses four magnetic connection points โ two at the lower sides and two at the upper sides of the frame โ that snap into place with ease and release with a simple pull. Once the headgear is adjusted to the correct tension, nightly removal and reattachment is handled entirely by the magnetic clips without readjusting any straps. The magnets are strong enough to hold securely through active sleep but easy enough to release for nighttime bathroom visits.
The top-of-head air routing keeps the face entirely free from tubing, and combined with the 4-point clip system, the DreamWisp headgear delivers one of the fastest and most convenient nightly setups in the Philips nasal mask range. Available in Small, Medium, and Large. Replace every 6 months to maintain the clip engagement strength and strap tension that keep the Wisp cushion correctly sealed through the night.
Key Features
๐งฒ
4-Point Magnetic Clips
Four magnetic connection points snap the mask on and off in seconds โ no strap readjustment needed nightly once correctly set. Secure through sleep, easy to release.
๐
Top-of-Head Tube Design
Engineered for the DreamWisp's top-of-head air routing โ tubing completely clear of the face for unrestricted movement in any sleep position.
๐
Three Sizes
Small, Medium, and Large โ a broader size range than many Philips nasal headgear options, ensuring correct tension across a wider range of head sizes.
๐ฐ
Cost-Effective Replacement
At AED 220 โ a fraction of full mask cost โ replacing headgear every 6 months restores clip engagement strength and strap tension without replacing the entire DreamWisp mask.
Compatibility & Specifications
| Compatible Mask | Philips Respironics DreamWisp Nasal CPAP Mask only |
| Not Compatible With | DreamWear Nasal, DreamWear Full Face, Wisp Fabric, Wisp Silicone โ different headgear systems |
| Material | Soft fabric โ lightweight, breathable, latex-free |
| Clip System | 4-point magnetic clips โ upper and lower sides |
| Sizes Available | Small, Medium, Large |
| Tube Direction | Top-of-head โ designed for DreamWisp top-tube frame connection |
| Replacement Frequency | Every 6 months, or when clip strength or elasticity is reduced |
| Cleaning | Hand wash weekly โ mild soap, warm water, lay flat to air dry |
| Includes | Headgear only โ DreamWisp frame and cushion not included |
When to Replace Your DreamWisp Headgear
- The magnetic clips feel weaker and no longer hold the mask securely against the face during sleep
- The fabric straps have stretched and the mask drifts or shifts position during the night
- Cushion leaks have increased despite the cushion being recently replaced and in good condition
- Morning facial marks have worsened โ a sign of compensatory overtightening
- It has been 6 months or longer since the last headgear replacement
โ ๏ธ Magnetic clips โ implant notice: The DreamWisp headgear contains 4-point magnetic clips. Patients with pacemakers, cochlear implants, neurostimulators, or other active medical implants should consult their physician before use. Non-magnetic replacement clips are available from Philips Respironics for patients where magnets are contraindicated โ contact our team on +971 56 593 5931 for guidance.
๐ DreamWisp-specific headgear: The DreamWisp uses a unique frame that combines DreamWear's top-of-head air channel with the Wisp cushion interface. This means the DreamWisp headgear is not interchangeable with standard DreamWear headgear or Wisp headgear โ only this dedicated DreamWisp replacement headgear is compatible with the DreamWisp mask frame.
๐งผ Headgear care: Hand wash weekly with mild soap and warm water. Lay flat to air dry away from direct sunlight. Never machine wash or tumble dry โ heat degrades the fabric's elastic fibres and can weaken the magnetic clip seats, reducing both strap tension and clip engagement strength over time.
Frequently Asked Questions
Is this the same headgear as the DreamWear Nasal headgear?
No โ the DreamWisp uses a different frame geometry and a 4-point magnetic clip system that is not found on standard DreamWear headgear. The two headgears are not interchangeable. Always use the DreamWisp-specific headgear with the DreamWisp mask.
Is this headgear safe for patients with pacemakers?
The DreamWisp headgear contains 4-point magnetic clips, which means it is not automatically suitable for patients with pacemakers or other active implants. Non-magnetic replacement clips are available for the DreamWisp for patients where magnets are contraindicated. Please consult your physician and contact our team for guidance on +971 56 593 5931.
Do I need to readjust the straps every night?
No โ once the DreamWisp headgear is adjusted to the correct tension, the 4-point magnetic clips handle nightly removal and reattachment without any strap readjustment. The clips snap the mask on and off at all four points in seconds, and the strap setting is retained between uses.
Which size should I choose?
Small suits patients with a smaller head circumference, Medium fits most adults, and Large is for patients who find Medium too snug even at maximum adjustment. If you are unsure, contact our team via WhatsApp on +971 56 593 5931 for sizing guidance before ordering.
Related Products
