ResMed
ResMed N20/F20/F30 Replacement Mask Clips - 2 Pack
ResMed N20/F20/F30 Replacement Mask Clips - 2 Pack
The ResMed Replacement Magnetic Mask Clips are the genuine OEM lower headgear clips for the AirFit and AirTouch N20, F20, F30, and F30i masks — sold as a pack of 2. The magnetic clips are what make nightly mask on/off effortless: they snap onto the mask frame at the lower strap connection points with a simple twist and release cleanly without adjusting strap tension. Replace when clips are lost, broken, or their magnetic hold has weakened. Also fit the F40 and X30i. Blue/white colour — compatible with both standard and For Her headgear.
🇦🇪 Same-day delivery in Dubai · Next-day UAE-wide · AED 95 incl. VAT
Couldn't load pickup availability
Product Features
Details
ResMed Replacement Magnetic Mask Clips — Overview
The ResMed Replacement Magnetic Mask Clips are the genuine OEM lower headgear clips for the AirFit and AirTouch N20, F20, F30, and F30i mask families — sold as a convenient pack of 2. These small blue and white components are the connection point between the lower headgear strap and the mask frame. Without them, the headgear cannot attach to the mask. They are the component that makes nightly CPAP therapy as simple as two snaps on, two snaps off — removing the need to fully re-thread and adjust headgear every single night.
The clips attach to the lower portion of the headgear straps and connect magnetically to the corresponding magnets built into the mask frame. The twist-to-lock mechanism creates a firm hold that stays secure through an active night's sleep, while still releasing cleanly and intuitively when you need to remove the mask for a bathroom visit or in the morning. Once the headgear tension is set correctly, the clips retain that setting — the mask goes on and comes off at exactly the same fit every night without any readjustment.
Clips can break, crack, or lose magnetic strength over time — particularly if the headgear is regularly machine washed with clips attached, or if the clips are dropped or twisted against the grain of their magnetic alignment. Rather than replacing an entire headgear assembly, these replacement clips allow targeted repair of just the component that has failed, saving significant cost and extending the useful life of otherwise functional headgear.
Key Features
Compatibility & Specifications
| Compatible Masks | AirFit N20, AirTouch N20, AirFit N20 For Her, AirTouch N20 For Her, AirFit F20, AirTouch F20, AirFit F20 For Her, AirFit F30, AirFit F30i, AirFit F40, AirFit X30i |
| Not Compatible With | AirFit P10, N30, N30i, P30i — no magnetic clips on these masks |
| Pack Contents | 2 magnetic clips (blue and white) |
| Colour | Blue and white — matches standard ResMed headgear. Also fits For Her headgear |
| ResMed Part Number | 63475 |
| Connection Point | Lower headgear strap — attaches strap to mask frame lower tab |
| Mechanism | Twist-to-lock magnetic — firm hold during sleep, quick release on demand |
| Magnetic Field Strength | Up to 400 mT — keep at least 15cm (6 inches) from implanted devices |
| Installation | Attach to lower headgear strap ends — remove before washing headgear |
When to Replace Your Clips
- One or both clips have cracked, broken, or snapped off the headgear strap
- Clips have been lost — mask cannot attach to the headgear frame without them
- The magnetic hold feels noticeably weaker and the mask detaches during sleep
- Clips were machine washed repeatedly with the headgear and the plastic housing has degraded
- The mask was dropped and the clip housing cracked even if still partially functional
🔧 Installation tip: Slide each clip onto the lower tab of the headgear strap ends — the clip housing has a slot that feeds onto the strap tab. The magnetic face of the clip should face inward toward the mask frame. Always remove the clips from the headgear before washing — machine washing with clips attached can crack the plastic housing and weaken the magnetic elements.
⚠️ Magnetic safety: These clips contain magnets with a field strength of up to 400 mT. Keep at least 15cm (6 inches) away from pacemakers, implantable cardioverter defibrillators (ICD), neurostimulators, CSF shunts, insulin/infusion pumps, aneurysm clips, cochlear implants, and other active or magnetically sensitive implants. This applies to both the patient and any person in close physical contact during sleep. Patients with these implants should use the AirFit N30i or P30i headgear system, which has no magnetic components.
Frequently Asked Questions
How many clips come in the pack?
Two magnetic clips per pack — one for each lower headgear strap end. Both lower connection points need a clip for the mask to attach correctly to the headgear.
Do these clips fit the For Her headgear?
Yes — these clips fit both the standard blue/grey headgear and the For Her headgear variants for all compatible mask models. The clips are the same blue and white colour regardless of headgear variant.
Can I wash the headgear with the clips attached?
No — ResMed recommends removing the clips from the headgear before washing. Machine washing or soaking with clips attached can crack the plastic clip housing and weaken the magnetic elements, shortening their life significantly.
Do these clips fit the AirFit F40 and X30i?
Yes — these clips are also compatible with the AirFit F40 and AirFit X30i in addition to the N20, F20, F30, and F30i families listed in the product title.
Related Products
Specs
At a Glance
Technical Specifications
| Product Type | Replacement magnetic lower headgear clips |
| Pack Quantity | 2 clips per pack |
| ResMed Part Number | 63475 |
| Colour | Blue and white — matches standard ResMed headgear |
| Mechanism | Twist-to-lock magnetic — firm hold during sleep, quick release on demand |
| Magnetic Field Strength | Up to 400 mT |
| Connection Point | Lower headgear strap — attaches headgear strap end to mask frame lower tab |
| Compatible Masks | AirFit N20, AirTouch N20, AirFit N20 For Her, AirTouch N20 For Her, AirFit F20, AirTouch F20, AirFit F20 For Her, AirFit F30, AirFit F30i, AirFit F40, AirFit X30i |
| Not Compatible With | AirFit P10, N30, N30i, P30i, F40i — no magnetic lower clips on these masks |
| Headgear Compatibility | Standard blue/grey headgear and For Her headgear — all sizes |
| Installation | Slide clip onto lower headgear strap tab — magnetic face toward mask frame |
| Washing | Remove clips from headgear before washing — do not machine wash with clips attached |
| Minimum Safe Distance from Implants | 15cm (6 inches) |
Key Features
⚠️ Magnetic safety — implant notice: These clips contain magnets with a field strength of up to 400 mT. Keep at least 15cm (6 inches) from pacemakers, implantable cardioverter defibrillators (ICD), neurostimulators, CSF shunts, insulin/infusion pumps, aneurysm clips, cochlear implants, and other magnetically sensitive implants. Applies to both the patient and anyone in close physical contact during sleep. Patients with these implants should use the AirFit N30i or P30i headgear system, which contains no magnetic components.
